- January 30, 2020
- CCST
Summary
Certified Control System Technicians (CCSTs) calibrate, document, troubleshoot, and repair/replace instrumentation for systems that measure and control level, temperature, pressure, flow, and other process variables.
CCST question
If a flow sensor is connectied to the DCS system and the flow is displayed in volumetric units, what calculation would been to be performed in the control system to display the flow rate as a mass flow rate?
A. mass flow rate = volumetric flow rate × pipe cross-sectional area
B. mass flow rate = volumetric flow rate × sensor input in mA
C. mass flow rate = volumetric flow rate × fluid density
D. mass flow rate = volumetric flow rate / pipe cross-sectional area
CCST Answer
The answer is C, mass flow rate = volumetric flow rate × fluid density.
To calculate mass flow rate, perform this calculation:
volumetric flow rate × fluid density
For example, using gallons for volume and LB for mass:
= gallons/min × LB/gallon
= LB/min
Reference: Goettsche, L.D. (Editor), Maintenance of Instruments and Systems, Second Edition, ISA, 2005.
Reader Feedback
We want to hear from you! Please send us your comments and questions about this topic to InTechmagazine@isa.org.